Steps:
1. Turn off the saw and disconnect the plug. Now, take the blade housing out of the tool handle. When removing the blade housing, be careful not to touch it.
2. Use a Phillips head screwdriver, or another suitable tool to remove any screws holding the blade housing in position. Simply turn the screws until the blade housing is free from its gripping surface.
3. Take the blade housing off the tool by gently pulling it away.
4. Take out any debris from the tool gears or other components.
5. One of the two blade screws should be used. Make sure that there is a copper washer under it. Slide both ends of each blade screw through the holes. The copper washer should be facing outwards towards you once inserted into its hole.
6. Use two hands to apply firm pressure on each side of the piece, while simultaneously turning counterclockwise. Adjust as necessary until the blade screw is released from its housing.
7. Before inserting a replacement blade screw, make sure that there aren’t washers beneath the end.
8. Again using firm pressure, turn both sides of this piece clockwise until they tighten against their respective holes and stay in place without movement. Repeat these steps to attach the second blade screw to your saws housing.
9. Make sure that both screws have been tightened firmly into place by giving them a few extra rotations with your hands just to be safe. You can now re-attach your tools blade housing to its working components before continuing on to use it!
Features
1. Its plastic body makes it lighter than other reciprocating saws currently on the market.
2. This products blade can spin at up to 3000 revolutions per minute.
3. This tool’s ergonomic design makes it easy to use. The grip handle has a lot of room between its teeth, which allows your hands to fit comfortably without cramping up during long tasks.
4. You don’t need to buy expensive rechargeable batteries for this tool as it is corded-electric.
5. This product’s 6 Amp motor provides a lot more torque when it runs, which allows its blades and other power tools to cut through harder materials much faster than others.
6. This saw’s blade is made of steel, which allows it to cut through any material, including wood, plastic, metal and stone, without bending or breaking under extreme force.
How to open the package?
The Ironton 6 Amp reciprocating saw is delivered in a square shaped box with the brand name, company name, model number and some other general specifications printed on it. The package has two sets of fasteners that are used to secure the handle part of the tool within its packaging. To open this package, you will need to use a sharp cutting object such as an X-acto knife or pair of scissors to cut through one of the non label ends of the tape seal located on either ends of the boxs top flap. After you have done this, pull the sides apart until the entire top flap is removed from its base.
How to insert the blade?
It is very simple to insert a blade in the Ironton 6 Amp reciprocatingsaw. Start by holding the blade in one hand and pointing towards your housing with the other. Next, use your other hand to slide the ends of the tool onto the bars in the upper part of the housing. Align them so that they are exactly within the designated grooves. After the tool is in place, turn on your saw to test it before you start any cutting tasks.
How to shut off?
Simply move your fingers away the ON/OFF switch, or main power button to safely unplug your Ironton reciprocating saw. For a safe work environment, simply move your fingers away from the ON/OFF switch or main power button to bring the tool to a halt.
How do you fix it?
If the Ironton 6 Amp reciprocatingsaw cannot be turned off using its ON/OFF switch then try another wall socket and another power cable. If even this does not work then there could be a possible wiring issue going on with this tools power cord.
How do you hold the saw?
You will hold the tool in one hand, with its housing facing away from your face. Then, you can use the other hand to slide the handle onto the rails at the top and bottom of the housing. Turn on the saw, and then test it out before you start any cutting tasks.
How to make a cut?
To ensure safety, make sure both security screws are securely in place. Give them a few more rotations with your fingers to make sure. Now you can reattach the tools blade housing to its functional components and continue to use them!
How do you clean?
The Ironton 6 Amp reciprocatingsaw may become less capable of cutting through certain materials after some time. This could be due to some dust build up around the bars located inside the housing which are used for supporting its blades.
Clear out any dust and ensure your saw runs at its maximum capacity. Follow these steps:
1. You should unplug the power cord from the wall socket. This could lead to some very serious injuries that you want to avoid.
2. Using a screwdriver or any other small device that can fit inside its gaps, lift up the upper part of your saws housing with both hands.
3. This part should be removed from the lower half.
4. Blow away all dust particles that might have built up around the bars that are used for supporting blades along the inner sides of the upper area of this saws housing using compressed air or an air compressor.
5. To clean your tool body of heavy dirt and grime, use a towel or tissue paper that has been soaked in oil. This will not cause any damage to its internal components.
6. Set both parts of your Ironton 6 Amp reciprocating saws housing back into place and turn off its power supply before taking care of serious repairs or replacements to avoid any accidents!
Safety Precautions
1. Always wear safety goggles when using this tool for any kind of cutting tasks to minimize the risk of getting debris or material in your eyes, which could potentially lead to a loss of vision if not treated properly!
2. To avoid any accidental falls, make sure both security screws are tightened by rotating the saw a few more times before you start cutting.
3. It is important to be careful where the power cord for your tools is located.
4. While using this product, make sure that there is always at least 0.3 m of distance between yourself and other people nearby in order to prevent the possibility of anyone getting nicked by its blades while they are still rotating.
5. Always remove both parts of this saws handle from one another before attempting to transport it or storing it in a safe place out of reach from children and other pets that may mess around with it while youre away!
6. To avoid any injuries while cutting, lower your saw blade slowly. Only begin making cuts once you have brought your blade all the way down to where your material is being held!
7. You should never place anything fragile or thin in the path of this saw. It could crack under pressure, which could lead to injuries.
Conclusion
